![]() ![]() The thicker the plank or tile, the more stability it offers. The flooring’s entire thickness matters up to a certain extent. The corresponding wear layer thickness can range from 1 mil to 40 mil or thicker. Vinyl flooring thickness ranges from as low as 2mm to 8mm or more. The flooring’s entire thickness is measured in mm, while mil describes the wear layer’s thickness. The flooring product will have both measurements with different implications, so you need to be careful to select the appropriate thickness. One mil is equal to one-thousandth of an inch, whereas one mm is approximately equal to 40 mil. The term is similar to millimeters therefore, many people use ‘mil’ and ‘mm’ interchangeably, but the meaning of these terms is vastly different. Understanding Vinyl Flooring MeasurementsĪs you shop around for vinyl flooring, you might come across the term ‘mil’ referring to the product’s thickness. The product is then finally cut up into different-sized tiles, planks, or sheets for commercial and residential use. The final top coat is urethane, applied to the wear layer for extra protection and sheen. The top PVC layer is the wear layer and serves as the flooring’s main protective barrier. The print film paper is then coated with a clean, thin layer of PVC for protection against scratches, dings, and the elements. It is then covered with print film paper, which gives the product its respective color and pattern. The backing material is typically made of hard plastic materials or fiberglass. Most of the vinyl you will find in the market today is a combination of polyvinyl chloride ( PVC), print films, and other hard plastic materials.
0 Comments
Leave a Reply. |